LED Indicators

Paypal users add £1.00 for orders over £20.00


Add £3.50 carriage up to £15. £15 - £25 add £3.95,

£25.00 - £50.00 add £4.95, £50.00 - £100.00 add

£7.95, Over £100.00 add £11.95

If in doubt E mail for a price norbsa02@aol.com

Overseas bulb & LED orders add £2.00. Other overseas orders E mail for carriage costs.


LED indicators available on E Bay may be cheaper, but these LEDs are designed to suit classic motorbikes, are bright enough & big enough to be seen


These are BA15s (1156) LED indicator bulbs designed to replace the standard bulb. They only consume 3 Watts but are as bright as the original indicator bulb.

They are available in 6V or 12V please state which

Positive earth or negative earth, please state which

They can be used with clear or amber lenses

Pt.no. LDIND12V / LDIND6V £7.25 ea.



Standard flasher units do not work with LED indicators, an LED Compatible flasher unit must be fitted

If a warning light is fitted, a "Tweaker" may be needed see below.

LED compatible Flasher unit

Pt.no. WRELED01 2 pin £12.95

Pt.no. WRELED02 3 pin £12.95

3 Pin wiring: B= Bulbs, L= Live & E= Earth.

For pos. earth swap B & L

If the letters cannot be read, with the centre terminal at the top, B is left, E is right & L is at the top


Pt.no. CF13 3 Pin flasher unit wiring

Neg earth only

L = Bulbs

E = Earth

B = Live +

Pt.no. CF12 2 pin flasher unit

Neg earth L = Bulbs B =Live +

Pos earth B = Bulbs L = Live -




These are fitted to the indicators below



New Traditional round indicators with clear lenses, specially developed to blend in with an old bike or car fitted with bright orange LEDs. Very bright & only consume 1.5W each.

6V or 12V LEDs

6V Pt.no. INDCCLED + 6V 12V Pt.no. INDCCLED + 12V

£39.50 per pair Now in stock

State 6V/12V & POS or NEG earth




Good quality metal bodied indicators, these feature a rubber seal between the body & lens to keep moisture out.

The M8 mounting thread is over 30MM long so can be used to mount the headlamp at the front & mudguard at the rear. 49MM dia. & 65MM long.

Don't look out of place on Austin 7s etc. & can be supplier with a panel mounting toggle switch.

Pt.nos. INDCBULED 6V or INDCBULED 12V Please state negative or positive earth


On installation the black/white wire is earth


Pt.nos. INDC015LED 6V or INDC015LED 12V Please state negative or positive earth

49MM dia. & 65MM long


On installation the black/white wire is earth


For indicators with standard bulbs click here



These are reproductions of the Lucas indicators fitted to 1970s BSA, Triumph and Nortons. They are 2 5/8" in dia. The mounting threads as the originals are 7/16 UNF

Fitted with LEDs £32.40 / pair.

3.0" Stalk Pt.no IND10170LED 6V or 12V Please state which

5.0" Stalk Pt.no IND10171LED 6V or 12V Please state which

St./St. Locknuts to suit £1.00 ea. Pt.no INDLN



Minature LED indicators. Only 40MM long. Can be wired for either positive or negative earth. Polished chrome finish, clear lens with amber leds.

Pt.no. INDLED13 12V only

£42.90 per pair


LED indicators. Can be wired for either positive or negative earth. Black finish, clear lens with amber leds. Long or short, long shown 12V

Pt.no. INDLED18 - LONG


£21.95 per pair



These have BAY15d offset pin double contact bayonets. 12V negative earth. They also work on 6V but not as brightly

When one contact is powered the LED will light white. When the other contact is powered the LED lights orange

If when the white light is showing the orange contact is powered, as for indicators, the white will go out so that the orange flashes alone giving maximum visibility. When the orange is no longer powered the white will again light.



£10.95 each

Bulbholders Pt.no. HL132001 £5.95 each


42MM long x 18MM dia


Shown here for size with standard stop/tail bulb

These now look slightly different to the ones shown.




The indicator warning LED gives a green light.

Mounting needs just one 12MM hole with holder, or 8MM without. With the holder it fits the warning light holes on later Lucas headlamps. The kit comes with everything needed + instructions, easy to install just 3 wires to connect

This can be used for conventional or LED indicators.

6V or 12V negative or positive earth, please state which

12V Pos. earth O/Stock

Pt.no WLneg (Neg earth) £8.95 Pt.no WLpos O/Stock(Pos earth) £8.95 Made in England




If all four of your LED indicators flash together, you need one of these Tweakers

Easily wired inside the headlamp shell, takes 5 minutes.

Pt.no.LDTW (Neg or Pos)


Negative or positive earth, please state which.

Made in England


If you fit a LED bulb in place of a std. indicator bulb it will only work on one side, left or right not both. You need a Tweaker.



Thes give a high pitch buzz, loud enough to be heard inside a crash helmet, and come with instructions + everything needed to install

They are quite small so will often fit inside the headlamp/nacelle,or can be tied onto the wiring harness almost anywhere.

We have had these specially made with an extra wire that can be attached to the brake light feed to silence the buzzer. So when waiting at a junction, put your foot on the brake and when the lights change & you ride off the buzzer returns.

If you use an LED rearlight, the buzzer may not sound. In that case the brakelight wire must be earthed & you will lose the brake/buzzer off facility


Easy to install, & the brake light wire can be cut off if not required.

Made in England


12V Positive earth Pt.no. WBpos. £9.95

12V Negative earth Pt.no. WBneg. £9.95 O/Stock

6V Positive earth Ptno. WB6pos. £10.50

6V Negative earth only Pt.no WB6neg. £10.50


As in many other areas, technology has overtaken law making, therefore some LEDs may not comply with all current legislation, European or US, particularly when fitted to more modern vehicles.


What's new page
How to order
Genuine Lucas electrical parts
LED running lights for older cars/motorbikes
LED bulb replacements for cars & motorcycles
Brighter Quartz Halogen bulbs for older vehicles
Standard replacement bulbs, cars & M/cycles
Motorcycle indicators
Motorcycle batteries
Motorcycle & Car lighting
Motorcycle electrics
Pazon electronic ignitions & Mag. replacements
Alton generators, dynamo replacements
Motorcycle accessories
Motorcycle petrol taps and fittings
Motorcycle Oil Filter Kits
Speedos, tachos, drive units, mountings etc.
Handlebar levers for Classic Bikes
Girling Replica motorcycle shock absorbers
BSA fork upgrade kit & other A7/10 parts
Stainless Steel Silencer Clamps
Goffys Norbsa 850
Goffys A10
Goffys Dommi


Write to me: 62 Clare Rd. Prestwood Bucks. HP16 0NU

Ring me on: 01494 868218

9.00AM - 5.30PM Mon./Fri.

Please leave a message if I'm out

Don't phone in the evenings, it makes me grumpy

For ordering see How to order

E mail me at: norbsa02@aol.com (use this address for Paypal payments)